Products
Adjustable pedestals for decking tiles
Adjustable pedestals for decking joists
Fixed height paving support pads
System zagospodarowania wody deszczowej
Terrace accessories
System zagospodarowania wody deszczowej
Lawn edges
Contact
+48 58 585 97 37CONTACT@DDGRO.EU
Products
Contact
wspornik tarasowy regulowany bardzo wytrzymały
MAX SERIES

Terrace Adjustable Pedestal MAX for joists and boards.

Home » Terrace Adjustable Pedestal MAX for joists and boards
For joists and boards and for tiles
Adjustment: 45 mm - 950 mm
Resistance to heavy loads
DISCOVER THE ADJUSTABLE PEDESTALS.

Who is the terrace adjustable pedestal MAX for joists and boards for?

The terrace adjustable pedestal MAX for joists and boards will be perfect for the construction of terraces and other structures with higher requirements. In addition to private and industrial applications, they are most often used in specialized urban projects, such as public utility squares or high floors for special purposes.
See the video

The highest ventilated terrace.

You can easily raise the terrace up to 95 cm while maintaining its stability. You can complete the functionality of the adjustable pedestal with additional equipment.

Uncompromising stability.

The base width of 210 mm and additional stabilizing elements allow a single MAX type adjustable pedestal to withstand a load of up to 1000 kg!

A terrace that levels itself.

The practical base corrector allows you to use the adjustable pedestal on surfaces with slopes and adjust the angle of the structure inclination by up to 8%. And by adding the LE 6% self-leveling head to this, you can get a slope adjustment of up to 14%.
THE ADJUSTABLE PEDESTALS PROTECT THE ENTIRE TERRACE / FLOOR CONSTRUCTION FROM MOISTURE.

Instead of frequently damaged and leaking floors - use adjustable pedestals! They will serve you for many years without any failure.

The terrace adjustable pedestal MAX for joists and boards is the heart of every ventilated terrace. In this series, it is a product for special tasks. In addition, it stabilizes the floor and has a high, maximum possibility of raising the level of the terrace. Designed to make the most of the technology of ventilated terraces and to withstand the most difficult construction tasks.

The terrace adjustable pedestal MAX for joists and boards can be reused after changing the floor to a new one.

Due to the fact that the terrace adjustable pedestal MAX is not permanently attached to the terrace covering / board / joist, for example with glue, after damaging part of the terrace and the need to replace the boards with new ones, we can use the adjustable pedestals we already have.
ASSORTMENT.

Complementary accessories

Tuleja dystansowa MAX DS 200 MM.
Height coupler MAX DS 200 mm.
Thanks to a properly designed structure, the adjustable pedestal MAX is fully adapted to carry heavy loads and can be used even in the most demanding projects.
Structure designed to carry loads.
"The structure is as strong as it can withstand its weakest point." The weakest point of the structure determines the entire strength of the cantilever. When the structure is ill-considered, the strength of the adjustable pedestal is much lower. The adjustable pedestal MAX has a structure designed to carry heavy loads. The weight resting on the supports is axially transferred through the structural walls to the ground on which it stands.
Wygłuszająco-wyrównująca gumowa podkładka pod płyty 1,5 mm.
Soundproofing and leveling 1.5 mm rubber shim.
Rubber shim can be widely used when laying terraces on terrace adjustable pedestal. When there is a need to compensate for unevenness in the thickness of terrace tiles, rubber shim are the best solution. They effectively prevent squeaking and crackling of sand particles
between the tile and the adjustable pedestal. In addition, they catch vibrations, which dampen the entire structure of the terrace.
Korektor nachylenia podstawy SC MAX.
Base corrector SC MAX.
In the case of larger slopes on the terrace or installation of tall structures, it is necessary that the adjustable pedestal is positioned in the vertical axis. Then, the transferred loads act axially on the adjustable pedestal, which makes it fully stable and its strength parameters.
For this, the base slope corrector comes in handy. It has a smooth adjustment and has the ability to compensate for slopes in the range of 0-8% of the slope. The base inclination corrector can be used simultaneously with the self-leveling head, which allows to achieve safe slope correction together up to 14% of the ground inclination.

Adjustable pedestals specification.

Base diameter: 210 mm
Top diameter: 145 mm
Terrace height: 45-950 mm
Slope correction: 0-14%
Max weight: 1000-1600 kg / adjustable pedestal
Download the flyer

Construction of the adjustable pedestals.

1.
Adapter for mounting the joist.
Perfect attachment of a joist, whether wooden, aluminum or any other material, to the adjustable pedestal. All you need to do is choose the right screws.
2.
Adjustable pedestal screw.
It has a top hat with a diameter of 145 mm for a good support of the tile or terrace joist.
3.
Sleeve nut.
It is used to adjust the height of the terrace and has a telescopic thread to achieve the maximum height of the adjustable pedestal.
4.
Height coupler.
The spacer sleeve allows you to increase the height of the adjustable pedestal by an additional 200 mm.
5.
Base of the adjustable pedestal.
210 mm wide base to keep the adjustable pedestal stable.
6.
SC MAX base slope corrector.
Maintaining the vertical axis of the adjustable pedestal to maintain full stability and strength of the structure.
Budowa Wsporników.

Are you looking for an adjustable pedestal for tiles?

Terrace adjustable pedestals DD PEDESTALS MAX series are also available for tiles.
See the MAX adjustable pedestals for tiles.
JOIN THOUSANDS OF HAPPY OWNERS OF VENTILATED TERRACE.

Do you dream about the perfect terrace on pedestals?

Check now where you can buy our products or get samples to test them live before buying.
I want to contact