Who are the terrace adjustable pedestal spiral for tiles for?
Terrace adjustable pedestals SPIRAL for tiles are intended for private terrace owners and contractors who appreciate the advantages of ventilated terraces but need the possibility of adjusting the pedestals at the lowest possible height of the terrace from the ground, as they can be adjusted from 10 mm.
The new adjustable pedestals lowers the minimum height of the terrace to be adjusted from 10 mm. Therefore, it allows to use the technology of ventilated terraces even at very small distances between the ground and the terrace.
Height adjustment every 1 mm.
The spiral structure of the adjustable pedestal allows for adjustment in 1 mm increments in the adjustment range from 17 to 30 mm.
For terrace tiles and joists.
Similarly to other adjustable pedestals and support pads, terrace adjustable pedestal SPIRAL for tiles is prepared to work with both terrace tiles and joists.
Advantages of adjusting the pedestals.
The flexibility of adjustable pedestals has already been appreciated by many contractors and terrace owners. Now it is possible from 10 mm.
RELIABLE AND RESISTANT TO WEATHER CONDITIONS VENTILATED TERRACES NOW FROM 10 MM.
Low terrace adjustable pedestal SPIRAL for tiles with great possibilities.
Thanks to the new design, this small terrace adjustable pedestal SPIRAL for tiles brings a lot of new possibilities in the construction of terraces.
The new adjustable pedestals SPIRAL series fill the existing gap between the stackable, fixed-height support pads, which may have been insufficient in some situations, and the standard adjustable pedestals with an adjustment range from 30 mm. However, the terrace adjustable pedestal SPIRAL for tiles are also the same as other series, as their range reaches up to 210 mm.
Its step adjustment works by rotating the two halves of the cantilever in opposite directions. This causes the successive steps to jump and the adjustable pedestal is raised or lowered by 1 mm.
Products and accessories available.
DDP 010-017 MM
Terrace adjustable pedestal SPIRAL 10-17 mm
DDP 017-030 MM
Terrace adjustable pedestal SPIRAL 17-30 mm
DDP 030-050 MM
Terrace adjustable pedestal SPIRAL 30-50 mm
DDP 050-070 MM
Terrace adjustable pedestal SPIRAL 50-70 mm
DDP 070-090 MM
Terrace adjustable pedestal SPIRAL 70-90 mm
DDP 090-110 MM
Terrace adjustable pedestal SPIRAL 90-110 mm (up to 210 mm)
The holes make it possible to use 3 or 5 mm gap spacers and adjust their arrangement.
Specially designed rotating gap discs with 3 and 5 mm gaps width.
Distance base 60 mm
Increases the height range of +60 mm
A soundproofing and leveling rubber shim 1.5 mm under the boards.
Rubber pads can be widely used when laying tiles terraces on terrace adjustable pedestals.
Wall distance clip.
To be used when it is necessary to maintain an expansion gap between the edge of the terrace and the adjacent tile.
Self leveling head LE
The terrace is perfectly level. Your terrace can lie perfectly flat despite the fact that the ground below it has a slope of up to 6%.