"Many years of experience in the design and installation of terraces, both made of exotic wood, composite boards and stone or ceramic tiles gives us the opportunity to propose the correctly selected substrate for a given type of terrace.
Depending on the customer's conditions, an appropriate supporting structure is made for terrace boards, stone or ceramics tiles and the subsequent construction of the terrace, including the raised / ventilated terrace."
Type of terrace - wooden terraces, composite terraces.
Terraces made on the ground, terraces made on concrete screed, floating / ventilated terraces leveled using adjustable pedestals without anchoring to the ground.
It is a technology for securing terrace substrates thanks to seamless insulation, e.g. insulating slurries, bituminous insulations, polyurethane insulation, pool paints.
Safety seamlessness guarantees an even surface thanks to which the next terrace layers can be laid and leveled e.g. on adjustable bedestals for additional stability and lack of inequality.
Balconies are an architectural element constituting an integrating part of the building. There are three main types of balconies due to the construction.
The most common are balconies: cantilever, slightly less often placed on an independent supporting structure, separated from the building and suspended.
Terrace waterproofing / Hydroisolation
Due to the ubiquity of moisture in the construction of the terrace, balcony, loggias, proper waterproofing is very important. The design of balconies and terraces must be designed and constructed in such a way as to ensure their safe use.
One of the main conditions for the durability of these elements is to prevent the ingress of moisture and water into the structure.
Waterproofing, which is a barrier against the penetration of water and moisture into the structure of the balcony or terrace is also a protection against corrosion of the structural board, leaks and the development of microorganisms.
The investor should choose waterproofing materials according to such criteria as the type of structural element (balcony or terrace) and the scope of work of the ground - the larger the surface, the more applied materials should have greater flexibility.
Correct insulation of the balcony and terrace, which protects against water penetration into the structure, is of particular importance when the terrace is located directly above the room, for example the living room. Water entering the structure results in moisture in the ceiling and creating conditions inside the building for the development of biological corrosion, e.g. fungi and mold.
The terraces are constantly exposed to atmospheric factors - rain, snow, strong sunlight and variable temperature. Especially the temperature in our climate is not very friendly for construction - every year it exceeds the 0 ° C limit at least several dozen times, causing alternately freezing and thawing of materials, and thus their swelling and shrinkage. In this way, all not exactly sealed places where water leaks break, leading to gradual destruction of the structure.
As subsequent layers cover those previously laid, any defects are difficult to fix. It's easy to hide or overlook them. They will only make themselves felt when there is a leak inside the house.
Terrace thermal isolation
Another very important fragment of the substrate preparation for the terrace, especially in places where the terrace, balcony, loggia is planned over the existing room. Thermal isolation allows savings in terms of heat loss.
Decline and slope of the terrace, drains
It does not matter whether it is a terrace on the ground or above the room. Everyone must have a suitable slope to drain the rainwater from the terrace floor. What should the terrace fall down like?
The terrace surface should be shaped with a slope outside, i.e. it must fall away from the building wall. A terrace fall of 1-2% (1-2 cm per meter in length) is considered sufficient.
Such a decrease in the terrace surface is practically imperceptible to the eye, and very important for the life of the terrace.
It prevents the penetration of rainwater or coming from melting snow into the building interior, moisture of the building walls, and also facilitates the free drainage of water.
It is unacceptable for the terrace to fall toward the building - then its wall is exposed to moisture, and puddles may form when entering the terrace.
Incorrectly made terrace fall
It results in: dampness of the base, peeling and destruction of the terrace cladding, leakage through the terrace slab, flooding of the room located under the terrace.
Leveling on adjustable pedestals allows you to level the terraces, balconies, loggias in accordance with all recommendations and protections for insulation including EPDM and jointless and obtain the correct slopes for water outflow, which is a condition for the proper functioning of the terrace surface.
Podłoże do ustawienia wsporników tarasowych
Ventilated terrace is a technology that can be used both on the ground, but also on old and new concrete screeds. Making such a terrace is economical and easy to assemble.
Do ventilated terraces have only advantages?
It seems that is right. Their construction is simple and cheap, so you can do it yourself. Plus, it's easy to replace damaged components and the flexibility of the surface on which the terrace will stand.
The construction of the ventilated terrace consists of plates mounted on special support terrace system placed on a stable surface. In the space between the terrace surface and the ground there will be space for necessary installations, which you can run even after the terrace is made.
All media will be under the terrace without a collision and you always have the opportunity to trouble-free outcrop. Raising the terrace above the ground makes it possible to drain rainwater, and the surface is hardy. Terrace tiles are laid on the adjustable pedestals.
Their installation is quick and simple, and if it needs to be replaced during use, there is no problem. The tiles, similarly to the adjustable pedestals, were removed, provided they had no mechanical damage or destruction, and are suitable for re-use, e.g. elsewhere.
How to build a ventilated terrace?
The construction of a ventilated terrace can be divided into two stages. The first is to prepare the ground, the second to lay the tiles, wooden and composite boards, ceramics and concrete tiles on the adjustable pedestals.
Remember to ensure proper water drainage during ground preparation - that is, to shape slopes outside. The substrate should also be protected against adverse weather conditions, for example with heat-welded roofing felt - the corners should be carefully sealed. On the prepared surface, we start placing the adjustable terrace pedestals on which the terrace tiles will be placed.
The adjustable pedestals, e.g. DD Pedestals for terrace tiles, are made of appropriate plastics. They transfer loads / ranges given by the manufacturer /, both at positive and negative temperatures / temperature range given by the manufacturer /.
In addition, the adjustable pedestals do not bend and are resistant to damage. The height of your badjustable pedestals will depend on the height of your ventilated terrace.
However, they are selected mainly depending on the substrate. There are three types of adjustable pedestals: height available on the market:
How to prepare the ground for terrace support system
The ground (foundation) for each planned terrace should be stable. In addition, it is preferable for the ground to be even, because the terrace can be laid / mounted directly on such ground. If the ground / foundation is uneven / and a leveling element should be used (e.g. DD PEDESTALS adjustablepedestals). The durability of the terrace structure depends on the properly prepared substrate.
Sand and cement base
Each construction should be adapted to the function it will fulfill. Terraces should be adapted to the needs of the owner. Those skilled in the art will certainly advise you on the design of the ballast for a specific construction and these design recommendations, including material choices, should not be ignored. What counts is quality and professionalism.
Groundwork - sand, cement or gravel?
The choice should be well thought out and suited to the project. In loose condition, the selected ballast should be leveled and its thickness adjusted to the needs of the surface. Your choice will allow you to finish the construction and enjoy the effects. After all, you want the effect to be lasting!
"The screed on the terrace should not be made without good preparation. It is easy to overdo with the amount of concrete poured, which can result in an uneven terrace.
Surely we must always take into account the thickness of the material that we plan to lay on the screed. Especially when the terrace exit is connected with the entrance to the building, and the balcony door opens outwards, it is quite important.
Before making a screed on the terrace, you need to prepare a primer with proper isolation. In the past, this concept was not known in construction and many buildings began to destroy because of the lack of proper isolation at the base, and the terrace can also directly adhere to the ground. A screed may also be needed when we want to create columns for terrace construction."
Heat-sealable roofing hydroisolation is a well-known insulation material used for roofing, foundation insulation, waterproofing terraces or balconies. Heat-welded roofing felt is becoming more and more popular, replacing roofing felt with traditional adhesive.
Heat-sealable roofing hydroisolation - characteristics
Heat-weldable roofing felt consists of several layers: topping, bitumen top layer, support matrix, bottom / bottom bitumen layer, release film. Heat-weldable roofing felt is glued by melting the bitumen on the bottom layer with a burner.
They have a factory-prepared plant that allows for quick tight connections of individual roofing felt strips, so well-laid waterproofing from roofing felt is durable.
It should also be remembered that the adhesive melts at 70 ° C, so the roof covering must be resealed every few years. Heat-sealable roofing felt has much better properties and does not require renovation for a long time.
Also called liquid foil. Is liquid film really a film? In fact, it is rather a specialist product based on synthetic resins, which, after drying, has sealing properties - anti-moisture and anti-moisture, just like real foil.
However, while it is difficult to imagine ordinary film as a material that would isolate elements from moisture for a long period - the liquid film is created just for such applications.
EPDM rubber isolation
EPDM is a synthetic rubber (rubber) belonging to the group of elastomers. EPDM is an abbreviation of the English name of the main membrane component, i.e. ethylene propylene diene monomer.
Other components of EPDM rubber are: technical carbon black, silt, technical oil, sulfur, stabilizers.
This rubber is formed in the vulcanization process. The main advantages of EPDM: high flexibility in very low temperatures, high elasticity and extensibility, pressure resistance, dimensional stability, high durability, easy installation, chemical resistance and environmental friendliness.
Hardness of XPS isolation boards when using adjustable pedestals
- for styrodur XPS - 200, the allowable compressive stress at deformation up to 10% is 200 kPa. Converting Kilopascals to kg / cm ^ 2 we have 200 kPa = 2 kg / cm ^ 2. So it turns out that we can put a load of up to 357 kg on one bracket.
- for styrodur XPS - 300, the allowable compressive stress with a deformation of up to 10% is 300 kPa. Converting kilopascals to kg / cm ^ 2 we have 200 kPa = 3 kg / cm ^ 2. So it turns out that we can put a load of up to 535.5 kg on one bracket. The above applies to the Standard series.
How to finish the edge of the terrace?
Drip cap, gutters, balustrade, the correct execution of all layers of the terrace does not guarantee that there will be no damage over time. If the edges are not carefully finished and the space along the walls of the house ineffectively sealed - the terrace can leak and destroy.
Drip cap - The edge of the terrace must always be ended with a drip cap in the form of a sheet apron, which projects 3-5 cm beyond the edge of the terrace tile. It protects not only against the formation of stains on the wall or pedestal, but above all protects against water penetration under the surface. The drip caps are attached directly to the tile adhesive layer, the part extending under the tiles should be perforated to allow good adhesion. An appropriately shaped coated aluminum sheet or system profiles adapted to draining the terrace are used as the drip cap.
Gutter installation - on large, uncovered roofed terraces, gutters are mounted along the lowest edge. This will prevent streaks that could be caused by rainwater on the façade, which always flushes dirt from the terrace surface. The gutters are mounted at the lowest edge of the surface slope, but on larger terraces it is also worth mounting the gutters on its sides. The edges of the terrace should be finished with metal aprons directing rainwater to the inside of the gutter.
Terrace railing installation - Railing seating
A common cause of terrace leaks is improper seating of balustrade posts. Because of their strength, they should be embedded in the terrace slab, which interrupts the continuity of waterproofing.
In the place where the posts are placed, it is necessary to apply a sealing layer of silicone (in the form of a conical ring surrounding the post). Another solution is to fix the posts not to the top of the terrace slab, but from below or on the leading edge.
Without disturbing the waterproofing. The system of such railing installation was introduced by, among others, DECK-DRY, the railings anchored to the deck without invading the terrace ground.
Connection of terrace layers with the building wall
Correct execution of this connection is important for the tightness and durability of the terrace. The basic condition is that 10-15 cm damp isolation is erected on the wall of the house.
If waterproofing is being laid during renovation, in the form of roofing felt on an inheritance layer, it should also be erected on the wall, with an oblique filling in the corner that allows for gentle bending of isolation.
However, in the case of tile isolation, an isolaiting tape insert is glued in the corner, and a layer of liquid film is applied to the wall. Due to protection against dirt as well as additional protection against water ingress, the wall strip near the terrace floor should be covered with ceramic tiles.
They must not come into direct contact with the terrace surface - at the contact with the wall we leave an expansion gap (filled with an expansion cord, covered with a layer of silicone). The top edge of the plinth tiles is also secured with silicone or acrylic mass.
Attic around the terrace
The attic is a structural part that closes the space of a balcony or terrace from the outside. Usually it has the form of a characteristic wall. In modern construction, attics are most often found on flat roofs, however, they are increasingly used on terraces and balconies. Attics can have different heights.
The most important, however, is the function they perform. First of all: the attic closes the thermal insulation of the balcony or terrace. It is also a type of water restriction. Low attic walls are ideal for mounting railings. High can be an alternative to railings, while being an effective architectural element.
Thanks to the attic on the terrace or balcony, the continuity of insulation layers is ensured - all thanks to the fact that it is not necessary to install balustrades and eaves profiles.
The window frame at the terrace
Regardless of the location, the terrace should ensure the right selection of windows, doors and blinds for this place. When installing large-format glazing, it is worth using those that operate on the basis of lift-slide fittings, which, together with the low threshold and the possibility of controlling the door with the help of a remote control, are a truly modern combination of technique and comfort in everyday life. Technology that guarantees warmth.
When choosing window frames for the terrace, we can not forget about the thermal properties. Regardless of whether we choose wooden, aluminum or PVC windows, they must have appropriate technical parameters to avoid large heat losses.
For large glazing, anti-burglary protection is also important. When planning the installation of window and door frames at the terrace, you should definitely think about:
location, type of building and method of use of the roof (public and residential building, etc.),
sealing concept (composite seal, drainage system) and type of wear layer,
technical and functional requirements (e.g. wheelchairs),
level of floor inside and terrace usable layer,
door structure and type (opened, sliding),
type of sealing material (roll, seamless),
presence of additional elements (e.g. external roller shutter guides).
it is extremely important that the adopted design solution allows waterproofing. Any unnecessary edge, bending, etc. is a potential place that hinders tight connections.
particular attention should be paid to the location, as well as the method and time of installation of external roller blinds. Too early installation of guides may even prevent sealing.
Wall and facade as a terrace edge
Home terraces can be done in many ways. One of the most popular is to make a concrete terrace tiles on a layer of compacted sand, leaning against the edges of concrete blocks, built on a foundation block. It does not matter if the terrace is adjacent to only one wall or to two - in the corner of the house.
Just like stairs, the terrace should also be separated from the house structure - preferably it will only touch the isolation of foundation walls made of extruded polystyrene or hard foamed polystyrene.
Also the benches on which the walls surrounding the terrace will be built of concrete blocks should be recessed in the ground (especially the ground floor) to a depth equal to the freezing zone of the soil. Since the concrete slab of the terrace is peripherally supported on these walls, it would not be good if it was broken due to frost linings lifting its edges.
The curtain of the side and end parts of the terrace are usually elements attached to the side edges and to the front part in order to mask the so-called terrace substructure, e.g. leveling made on adjustable pedestals.
Maskers can be made of a wooden board cut to the appropriate width, from composite masking slats, curb or stone. Masking the edges of the terrace can also be a suitable type of plants planted on the edge of the terrace.
Ventilated terrace eaves profiles
The correct finish of the hood is a condition of a durable terrace or balcony. The eaves profile should have anti-corrosive coatings appropriate for the application and a structure that ensures the tightness of the eaves.
Ventilated floors are currently the most dynamically developing technology used in the construction of terraces and balconies.
This technology owes its development to simple workmanship, lack of rigid and glued joints, and high durability.
For the proper functioning of a ventilated floor, eaves profiles are necessary, which act as a support for floor panels and ensure proper drainage of the floor.
Terrace borders are the latest generation of multifunctional edges, forming a stable, aesthetic crowning arrangement of terrace surfaces.
The solution based on a simple, innovative mechanism and durable material, allows for quick and effective finishing of also irregular terrace systems.
Used on gravel, grass and concrete surfaces, they are perfectly suited various types of terrace cubes.
In addition, after cutting out the lateral bridges, they can be installed even in compositions based on the shape of the arch. Edges also work as expansion joints.
The foundation for terraces on joists
It should be designed and constructed according to the planned terrace surface. Suitable for wooden, composite boards, ceramics tiles or every other terrace tiles. Also depends on the type of floor or building conditions.
So always chosen properly for the planned terrace or balcony, depending on its purpose and loads.
Used for greater rigidity of the structure, in case of need for NRO for the object, required at higher terrace loads depending on the load capacity of the material used, for grounding.
Used mainly for the foundation of wooden terraces. The joist wood species are selected with parameters similar or the same as the material used on the terrace.
It is selected according to the material used or terrace mounting system, e.g. DECK-DRY hidden mounting system, and also preferably in the construction of ventilated terraces on DD Pedestals adjustable pedestals.
Joist frame construction
Very important when installing composite terraces due to the technical parameters of the boards used, the frame stiffens the structure and prevents material distortions.
Made to maintain privacy as a decorative element, as a separation of the terrace / balcony size for individual residential premises.